[Elecraft] Power output changed in K3

[Johnny Siu]

Yes, I did and everything ok now.
73
Johnny VR2XMC
      寄件人︰ Phil Wheeler <w7ox at socal.rr.com>
 收件人︰ elecraft at mailman.qth.net 
 傳送日期︰ 2015年02月23日 (週一) 8:21 AM
 主題︰ Re: [Elecraft] Power output changed in K3
   
Then run the Power Calibration procedure using the 
K3 utility, Johnny.

73, Phil W7OX



On 2/22/15 4:06 PM, Johnny Siu wrote:
> Yes, I am using FW 5.10.
> 73
> Johnny VR2XMC
>        寄件人︰ "Joe Subich, W4TV" <lists at subich.com>
>  收件人︰ elecraft at mailman.qth.net
>  傳送日期︰ 2015年02月22日 (週日) 11:33 PM
>  主題︰ Re: [Elecraft] Power output changed in K3
>    
>
> Did you load one of the recent beta firmware releases?  Starting with
> 5.01 (I think) - certainly in 5.10 there was a change that required
> redoing the TX power calibration.
>
> 73,
>
>    ... Joe, W4TV
>
>
>
>
> On 2015-02-22 6:26 AM, Johnny Siu wrote:
>> Hello Elecrafters,
>> I recently discovered that only 20m can deliver 90W with all other bands deliver 40-50W.  I did a RF power output re-calibration and everything is ok now.
>> I don't know why this happens?  I did not do any changes in configuration before.
>> Any ideas?
>> 73
>> Johnny VR2XMC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vr2xmc at yahoo.com.hk