[Elecraft] Split operation - display of Transmit frequency on keydown

[QUENTIN COLLIER]

And in order to make the user interface properly user friendly, we could have a CONFIG item to set the shock voltage so that the operator suffers unbearable pain rather than death.... :-) 




73, Quin G3WRR



________________________________
 From: Mitch Wolfson DJØQN <dj0qn at gmx.net>
To: "Joe Subich, W4TV" <lists at subich.com>; elecraft at mailman.qth.net 
Sent: Wednesday, 18 February 2015, 11:21
Subject: Re: [Elecraft] Split operation - display of Transmit frequency on keydown
 

Joe, that is a great idea, but it doesn't go far enough. Some users might switch off the test mode on purpose. In this case, the K3 should induce an electric shock. Add some voice recognition software, so that when the user says "UP" in simplex mode, the K3 self-destructs.  ;-)

73,
Mitcn DJ0QN

Mitch Wolfson
DJØQN / K7DX
Neubiberger Str. 21, 85640 Putzbrunn
Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
Echolink: 3001 - IRLP: 5378

On 18.02.2015 02:00, Joe Subich, W4TV wrote:
> 
> Looking for the *absence* of a change when the PTT is pressed or the
> key is tapped to indicate that one has forgotten to engage split is a
> bit counter intuitive.  The *three* current indicators that split is
> engaged *before* entering transmit are the logical UI.
> 
> Perhaps the better solution is to ask the logging software authors to
> determine when VFO A is tuned to a frequency spotted as split and
> select TEST MODE if split is not engaged or both VFOs are on the same
> frequency <G>!   Maybe a lack of output will be sufficient "immediate
> feedback".
> 
> 73,
> 
>    ... Joe, W4TV
> 
> 
> On 2015-02-17 7:38 PM, Wayne Burdick wrote:
>> Or, we could replace the *entire* VFO A display with the word "SPLIT" during key-down. This would be even more obvious, and it wouldn't mess up the VFO B display. VFO B is what you care about during split TX.
>> 
>> Wayne
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to q.g.collier at btinternet.com