[Elecraft] [K3] LSB/USB/CW/CW-R question

[Joe Subich, W4TV]

 From the K3 Owner's Manual ver D10 pg 29:

> SSB/CW VFO Offset
>
> The K3 can automatically offset the VFO frequency when you switch
> from SSB to CW mode, so other stations will hear the correct CW
> pitch. See CONFIG:CW WGHT for details.

For CONFIG:CW WGHT See page 55 of the Owner's Manual

73,

   ... Joe, W4TV


On 2015-02-21 8:47 AM, KD8NNU wrote:
> I would love to know if there is a setting for this also.
>
> Thanks
> Don
> Sent from my iPad
>
>> On Feb 21, 2015, at 8:19 AM, w8zn54 at verizon.net wrote:
>>
>>
>> My friend had his K3 repaired at Elecraft and upon return, LSB is no longer on the same frequency as CW and USB is no longer on the same as CW-R as his other K3 is. Seems I remember way back in a previous release note where that could be set. Anyone know where to set this?
>>
>> Thanks!!!!
>>
>> Terry Price - W8ZN
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to goldtr8 at charter.net
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>