[Elecraft] KSYN3A and below 490 KHz?

[Harry Yingst via Elecraft]

There's always 160-190 KC
1 watt into a 49' antenna



      From: Ross Primrose <n4rp at n4rp.com>
 To: 
Cc: Elecraft Reflector <elecraft at mailman.qth.net> 
 Sent: Wednesday, February 18, 2015 2:12 PM
 Subject: Re: [Elecraft] KSYN3A and below 490 KHz?
   
On 2/18/2015 1:17 PM, Wayne Burdick wrote:


> Probably not. It allows quite useful sensitivity down to 250 kHz, and 
> even some utility at 100 kHz. But most operators are interested in the 
> 600-meter band (472-479 kHz). Wayne N6KR

At the rate they're going, my grand kids will probably be retired before 
the FCC grants US hams access to that band :(

73, Ross N4RP

-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyingst at yahoo.com