[Elecraft] A way to show both "SPLIT" and "NON-SPLIT" warnings

[David Cole]

Wayne,
If the user has a P3 connected, please consider the addition of
something on the P3 to indicate split.  Most of my eye action is on the
P3 in a pileup, not on the frequency.  
-- 
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Wed, 2015-02-18 at 07:02 -0800, Wayne Burdick wrote:
> Suppose we provide a menu option that, when engaged, results in this behavior:
> 
> - If you're NOT in SPLIT: keying the rig shows "NON.SPLT" on VFO B. (A is TX in this case.)
> 
> - If you ARE in SPLIT: keying the rig shows "SPLIT" on VFO A. (B is TX in this case.)
> 
> So, during keying in either case, the TX frequency is still displayed (you need to know that), but the RX display is used to provide a warning.
> 
> The time constant for these displayed messages would coincide with the change in metering from RX to TX. Thus the "NON.SPLT" or "SPLIT" would come on when you key, and stay on for at least 300 ms, the timer being retriggered each time you key. To get an idea of what that would look like, just watch the RX and TX metering scales as you key the radio.
> 
> It's not a "flashing" message, per se, but if you were calling a DX station on the order of every few seconds, the message would come and go to get your attention.
> 
> It has the advantage of being quite obvious since it changes the entire contents of one of the VFO displays, and both are very close to the VFO A knob, where the action is.
> 
> Wayne
> N6KR
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net