[Elecraft] A way to show both "SPLIT" and "NON-SPLIT" warnings

[Wayne Burdick]

Any change we make in the way split is indicated would have to be enabled using a menu entry. The present behavior will remain the default.

73,
Wayne
N6KR


On Feb 18, 2015, at 7:22 AM, Carey Magee <arsk2rny at gmail.com> wrote:

> Hi All:
> 
> Would this be able to be set as an option in the Menu/Config Menu?  I currently am fine with split indication. If I include my logging program I currently have 4 indicators to remind me.
> 
> Thanks  
> 
> 73,
> Carey Magee, K2RNY
> Rochester New York
> Grid: FN13ef
> arsk2rny at gmail.com
> 
> On Wed, Feb 18, 2015 at 10:02 AM, Wayne Burdick <n6kr at elecraft.com> wrote:
> Suppose we provide a menu option that, when engaged, results in this behavior:
> 
> - If you're NOT in SPLIT: keying the rig shows "NON.SPLT" on VFO B. (A is TX in this case.)
> 
> - If you ARE in SPLIT: keying the rig shows "SPLIT" on VFO A. (B is TX in this case.)
> 
> So, during keying in either case, the TX frequency is still displayed (you need to know that), but the RX display is used to provide a warning.
> 
> The time constant for these displayed messages would coincide with the change in metering from RX to TX. Thus the "NON.SPLT" or "SPLIT" would come on when you key, and stay on for at least 300 ms, the timer being retriggered each time you key. To get an idea of what that would look like, just watch the RX and TX metering scales as you key the radio.
> 
> It's not a "flashing" message, per se, but if you were calling a DX station on the order of every few seconds, the message would come and go to get your attention.
> 
> It has the advantage of being quite obvious since it changes the entire contents of one of the VFO displays, and both are very close to the VFO A knob, where the action is.
> 
> Wayne
> N6KR
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to arsk2rny at gmail.com
>