[Elecraft] KSYN3A - installation question

[Walter Underwood]

With no cat, I would recommend Sleater-Kinney.

wunder
K6WRU
CM87wj
http://observer.wunderwood.org/

On Feb 15, 2015, at 2:34 PM, Phil Wheeler <w7ox at socal.rr.com> wrote:

> And those with no cat?:-)
> 
> On 2/15/15 1:50 PM, Harry Yingst via Elecraft wrote:
>> But what about us old Head bangers?
>> 
>> 
>> 
>> 
>>       From: Wayne Burdick <n6kr at elecraft.com>
>>  To: Elecraft Reflector <elecraft at mailman.qth.net>
>>  Sent: Sunday, February 15, 2015 4:29 PM
>>  Subject: Re: [Elecraft] KSYN3A - installation question
>>    It is quite easy to swap the synthesizer boards without removing the KRX3 module. I did it blindfolded with a long-haired cat on my lap and the latest Tom Petty album blasting away.
>> 
>> Wayne
>> N6KR
>> 
>> 
>> On Feb 14, 2015, at 12:38 PM, "Joe Subich, W4TV" <lists at subich.com> wrote:
>> 
>>> I doubt it ... there is not all that much room between the front
>>> bulkhead and the edge of the KRX3 case.  In addition, Wayne mentioned
>>> the need to reroute some of the cables with may not be possible if
>>> the KRX3 is in place.
>>> 
>>> 73,
>>> 
>>>   ... Joe, W4TV
>>> 
>>> 
>>> On 2015-02-14 10:33 AM, Ken K3IU wrote:
>>>> I believe that you should ne able to install both boards without
>>>> removing the KRX3
>>>> 73, Ken K3IU
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> On 2/14/2015 10:03 AM, Dauer, Edward wrote:
>>>>> First question that came to my mind when I saw the announcement was
>>>>> whether the KRX3 had to be removed and reinstalled in order to replace
>>>>> the
>>>>> synths.  I found installing the KRX3 exasperating when I assembled the K3
>>>>> - success came on about the 12th try.
>>>>> 
>>>>> My K3 is 100 miles from where I am right now, so I looked at the
>>>>> photos in
>>>>> the K3 assembly manual and those in the new synth instructions, from
>>>>> which
>>>>> it appears that the swap could be done without removing the KRX3.  Could
>>>>> we confirm whether R&R is required?  Message below says it is.
>>>>> 
>>>>> If the sub does have to be R&R¹d, anyone have suggestions about how to
>>>>> reinstall it without the major fuss I experienced?
>>>>> 
>>>>> 
>>>>> Ted, KN1CBR
>>>>> 
>>>>> 
>>>>>> ------------------------------
>>>>>> 
>>>>>> Date: Fri, 13 Feb 2015 13:21:20 -0800
>>>>>> From: Richard Thorpe <kissov29 at gmail.com>
>>>>>> To: Elecraft List <elecraft at mailman.qth.net>
>>>>>> Subject: [Elecraft] More KSYN3A
>>>>>> Message-ID: <92F46418-CAAB-45A6-BFCD-F87860378242 at gmail.com>
>>>>>> Content-Type: text/plain; charset=utf-8
>>>>>> 
>>>>>> I talked to Elecraft and you must remove the second receiver not just
>>>>>> unplug it and remove its ?old? synth board.  . . .
>>>>>> 
>>>>>> R Thorpe K6CG
>>>>>> 
>>>>>> ------------------------------
>>>>> ______________________________________________________________
>>>>> Elecraft mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>> 
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>> Message delivered to kenk3iu at cox.net
>>>>> 
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>> 
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to lists at subich.com
>>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to n6kr at elecraft.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to hlyingst at yahoo.com
>> 
>>   ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w7ox at socal.rr.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org