[Elecraft] KSYN3A - installation question

[Joe Subich, W4TV]

I doubt it ... there is not all that much room between the front
bulkhead and the edge of the KRX3 case.  In addition, Wayne mentioned
the need to reroute some of the cables with may not be possible if
the KRX3 is in place.

73,

   ... Joe, W4TV


On 2015-02-14 10:33 AM, Ken K3IU wrote:
> I believe that you should ne able to install both boards without
> removing the KRX3
> 73, Ken K3IU
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> On 2/14/2015 10:03 AM, Dauer, Edward wrote:
>> First question that came to my mind when I saw the announcement was
>> whether the KRX3 had to be removed and reinstalled in order to replace
>> the
>> synths.  I found installing the KRX3 exasperating when I assembled the K3
>> - success came on about the 12th try.
>>
>> My K3 is 100 miles from where I am right now, so I looked at the
>> photos in
>> the K3 assembly manual and those in the new synth instructions, from
>> which
>> it appears that the swap could be done without removing the KRX3.  Could
>> we confirm whether R&R is required?  Message below says it is.
>>
>> If the sub does have to be R&R¹d, anyone have suggestions about how to
>> reinstall it without the major fuss I experienced?
>>
>>
>> Ted, KN1CBR
>>
>>
>>> ------------------------------
>>>
>>> Date: Fri, 13 Feb 2015 13:21:20 -0800
>>> From: Richard Thorpe <kissov29 at gmail.com>
>>> To: Elecraft List <elecraft at mailman.qth.net>
>>> Subject: [Elecraft] More KSYN3A
>>> Message-ID: <92F46418-CAAB-45A6-BFCD-F87860378242 at gmail.com>
>>> Content-Type: text/plain; charset=utf-8
>>>
>>> I talked to Elecraft and you must remove the second receiver not just
>>> unplug it and remove its ?old? synth board.  . . .
>>>
>>> R Thorpe K6CG
>>>
>>> ------------------------------
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kenk3iu at cox.net
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>