[Elecraft] Further K3 development

Fred Smith mfsj at totalhighspeed.com
Fri Feb 13 13:03:41 EST 2015 

This was one of the very reasons that I finally moved to Elecraft and sold
my last 2 FTDX-5000MP's several yrs ago and have plans on returning. Most
all Elecraft gear here as far as radios except for an IC-9100 which there
are no replacements for.

May they continue their present business model, as it works very well.


73,
Fred/N0AZZ
K3 Ser # 6730--KX3 # 5210--K2/100 # 6470-KAT100
P3/SVGA--KAT500--W2
Amps Elecraft KPA500 HF/6m--Alpha's 9500 HF--87A HF--Mirage B-5030-G
300+w--(2) B-5016-G's 165w 2m



-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Doug
Turnbull
Sent: Friday, February 13, 2015 11:04 AM
To: 'Terry Hart'; elecraft at mailman.qth.net
Subject: [Elecraft] Further K3 development

Dear OMs,   
     I will follow this thread for a while.   It would be nice to know more
about the performance enhancement as Johnny Siu has stated.

     What I am really chuffed about is that Wayne, Eric and company are
enhancing a radio which has been on the market perhaps seven years now.
Oh I like the modular design and construction and I love the company.

     The K3 is not being made obsolete but it is being updated right back to
SN 1 - My friend Brendan Minish, EI6IZ can update SN 42 and no doubt he
will.    I will be contacting Brendan to see what he thinks.

      Good going guys, my loyalty is rewarded yet attain.   If I can be
jingoistic it is nice to see an American company performing in this manner.
The edge is not lost.   Great to see the engineering continue to evolve the
K3 - thank you.

                 73 Doug EI2CN 

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Terry
Hart
Sent: 13 February 2015 14:39
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Upgraded K3 synthesizer module now available:
TheKSYN3A

---and I just received my K3 kit serial number 8795. I had no idea this was
coming up!
The extended receiver tuning down to 100KHz sounds interesting....what are
the front-end filtering arrangements for that, I wonder? And it would be
interesting to see some comparative close-in phase noise plots.

Terry G3VFO


----- Original Message -----
From: "Harry Yingst via Elecraft" <elecraft at mailman.qth.net>
To: "Wayne Burdick" <n6kr at elecraft.com>; "Elecraft Reflector" 
<elecraft at mailman.qth.net>; "Elecraft_K3 at yahoogroups.com" 
<elecraft_k3 at yahoogroups.com>
Sent: Friday, February 13, 2015 1:17 PM
Subject: Re: [Elecraft] Upgraded K3 synthesizer module now available: The
KSYN3A


> Dang, I just put the sub receiver in last week.... I should have 
> waited
>
>
>
>      From: Wayne Burdick <n6kr at elecraft.com>
> To: Elecraft Reflector <elecraft at mailman.qth.net>; 
> "Elecraft_K3 at yahoogroups.com" <elecraft_k3 at yahoogroups.com>
> Sent: Friday, February 13, 2015 1:07 AM
> Subject: [Elecraft] Upgraded K3 synthesizer module now available: The 
> KSYN3A
>
> The KSYN3A synthesizer module for the K3 is a completely new design 
> that improves on the original KSYN3 in several ways. All K3s shipped 
> on or after January 23, 2015 already include the new synthesizer 
> (serial number
> 8801 and later).
>
> See feature list below. Ordering and installation instructions can be 
> found here:
>
> http://www.elecraft.com/order_form_parts.htm#K3%20Parts
>
> * * *
>
> NOTE: If you wish to upgrade a K3 that includes the sub receiver 
> (KRX3), you'll need two (2) KSYN3A modules, since the synthesizers for 
> both receivers must be of the same type.
>
> * * *
>
> KSYN3A FEATURES:
>
> * FASTER CW BREAK-IN AND MORE ACCURATE CW TIMING
>
> A dedicated coprocessor on the module permits faster transmit/receive 
> switching, improving CW timing accuracy with both internal and 
> external keying. This also speeds up receive recovery between elements.
>
> * ULTRA-LOW PHASE NOISE
>
> The KSYN3A significantly improves the K3's already excellent receive 
> and transmit phase noise characteristics at close carrier spacings. 
> This, in turn, improves its close-spaced receive dynamic range, 
> yielding even better weak signal detection in the presence of strong 
> signals. In transmit mode, the KSYN3A keeps the signal exceptionally 
> clean, further enhancing K3 performance at multi-transmitter stations, 
> Field Day and DXpeditions.
>
> * 600-METER COVERAGE
>
> The new synthesizer provides complete coverage of 600 meters -- and below.

> VFO tuning extends down to 100 kHz, with sensitivity gradually falling 
> off

> below 450 kHz. Receive sensitivity (MDS) at 475 kHz is typically -120 
> dBm at the RX ANT IN jack. Transmit output of about 1.0 mW is 
> available for use with a suitable external amplifier. (Note: 600-m 
> allocations vary by country. Operation on this band requires the KBPF3 
> and KXV3 options. For receive-only use, an antenna can be connected to 
> the RX ANT IN jack on the

> KXV3 module. For transceive operation with an external amplifier, use 
> the XVTR IN and XVTR OUT jacks, and set CONFIG:KXV3 to TEST.)
>
> * EXCELLENT MECHANICAL STABILITY
>
> The KSYN3A is virtually immune to both physical vibration and magnetic 
> coupling, and operates over a very wide temperature range with no 
> change in performance. K3 kit construction is simplified, as the 
> KSYN3A requires no alignment of any kind.
>
> * * *
>
> 73,
> Wayne
> N6KR
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> hlyingst at yahoo.com
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> terry.hart at btinternet.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to turnbull at net1.ie

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to mfsj at totalhighspeed.com

More information about the Elecraft mailing list