[Elecraft] KX3 SWR

[Bill Wilkins]

Pretty sure of the dummy. Verified with the Analyzer flat as can be. Antenna
actually reads only 1.3-1 at the tested 10m freq with the Analyzer. KX3 says
1.8-1 no matter what. I am normally hooked into an HR50 and the KX3 ATU is
bypassed for this and should be. KX3 will tune down the 1.3-1 antenna direct
as it should to 1.1-1. (no amp)
I don't think the KX3 is actually seeing an 1.8-1, but is confused in
itself. 160 thru 20 meters are all 1.1-1.
I am going to do a re-update with the firmware and see what happens.
Did finally get this Reflector thing figured out Phil. Now works pretty
good. Happy here.
73, Bill, WD8JWJ



--
View this message in context: http://elecraft.365791.n2.nabble.com/KX3-SWR-tp7598124p7598138.html
Sent from the Elecraft mailing list archive at Nabble.com.