[Elecraft] Fw: K3-RTTY-No Diddles

[Don Wilhelm]

Paul,

Yes, time to contact Elecraft support for additional assistance.

73,
Don W3FPR

On 2/9/2015 12:27 PM, paul ecker via Elecraft wrote:
> Don- I was able to measure the voltage between pin 1 & pin 5 at the K3 ACC plug. It measured 4.95v -- I then removed everything from the ACC plug and plugged in the test DB15 plug with only wires on pin 1 & 5. Put the K3 in FSK-D submode, and tapped XMIT, I got a steady tone. I then shorted pin 1 & 5 and it did not shift to the space tone, just the same steady tone. So I guess things point toward an issue with the K3 ?
>
>