[Elecraft] More Legendary Elecraft Service or "The Turning of the Screw"

[Pete Smith N4ZR]

A couple of days ago I reported a fall-off in output from my K3 on some 
bands. I wrote about this to Howard, K6IA, at Elecraft service, who 
wrote back and suggested that one or more of the three screws that 
attach the LPA board to the lower cover of the radio might have loosened.

Sure enough - one of the three was 1/2 turn short of tight. Tightened it 
up, tested, all normal again.  Ran auto TX calibration, all successful. 
I happy camper am.  Thanks Howard!

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.