[Elecraft] K2 X7-X11 crystal grounding
John Cooper
wt5y at gt.rr.com
Sun Feb 1 00:28:57 EST 2015
Ground them to the sides on both sides. They stopped doing the tops years ago. Think it was filter blow by. I ground all crystals to sides now.
John WT5Y
Sent from my Cricket smartphone
-------- Original message --------
From: Michael Eberle <mteberle at mchsi.com>
Date: 01/31/2015 21:48 (GMT-06:00)
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K2 X7-X11 crystal grounding
Lane,
I believe you want to ground them as shown in the manual. I built my K2
using the method of grounding on both sides. It has been a little while
since I built mine but I seem to recall reading somewhere that this is
an improvement over grounding to the top. Also if you add options such
as the KPA100, grounding to the side helps eliminate clearance issues
with other circuit boards.
Mike
KI0HA
On 1/31/2015 20:12, Lane wrote:
> I'm at the point of grounding the X7-X11 crystals on page 54 of the K2
> build manual and the instructions appear to be different than whats shown
> on the K2 build photos on the elecraft site. The photos on the site show a
> single side ground to top of crystal. Manual seems to state grounding on
> both sides and slight up from board.
>
> Without anyone going way out of their way to do this, would anyone happen
> to have a photo of the proper grounding for these crystals?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mteberle at mchsi.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wt5y at gt.rr.com
More information about the Elecraft
mailing list