[Elecraft] P3 TX Mon Power Measurement Anomaly

[Jim Brown]

On Mon,12/28/2015 6:40 PM, Mark Goldberg wrote:
>   I have replaced
> UHF connectors with N connectors where I can, use nothing worse than
> RG214 or LMR400 for interconnects at my station, and have the
> interconnects as short as possible. I built many cables with exactly
> the connectors and lengths needed so I avoid adapters.

All of this is good EXCEPT that N connectors are NOT superior to good 
quality UHF connectors (Amphenol 83-1SP) for use on the HF bands. Yes, 
N-connectors are 50 ohm connectors, while UHF connectors are a bit off 
of that, but it simply does not matter below 50 MHz, and it matters very 
little below 200 MHz.

73, Jim K9YC

73, Jim K9YC