[Elecraft] K3S + SteppIR Controller+ MacLoggerDX

[Don Wilhelm]

David,

I do not use a MAC nor do I have the K3S, but from what I understand, 
you should have the "RS-232 Y" cable to activate the SteppIR controller 
between the cable between the K3S and the P3 XCVR connector.  That 
should allow the SteppIR controller to hear the band data information.

73,
Don W3FPR

On 12/28/2015 5:09 PM, David Ahrendts wrote:
> If you’re running a K3 or K3S with a SteppIR controller and MacLogger DX, I’ve got a question for you: RS232 frequency data from my P3 is split with a Y-cable between the SteppIR controller and the Elecraft KUSB cable that runs to my Mac Mini. However, to allow MacLoggerDX to initialize with the K3S, I must briefly disconnect the SteppIR controller (MacLoggerDX finds the K3S no available), allow MacLoggerDX to initialize with the K3S, and then re-connect the SteppIR controller to the Y-splitter cable.
> Anyone have a work around? They do share frequency data very efficiently once initialized.
>
>