[Elecraft] K3S, fldigi and Windows 10

[Joe Subich, W4TV]

 > I put the K3S in VOX mode, USB, 14.070. I set the Mic+LIN to ON.

*DON'T* use USB for data modes and *DON'T* use Mic+LIN = ON.

Instead, use DATA A for fldigi and set CONFIG:MIC SEL = LINE IN for
data modes.  That will allow the MIC Gain to control LINE IN *and*
keep the mic from being "hot" (picking up every sound in the shack).
You may still use VOX with MIC SEL=LINE IN in data modes if you
wish.

73,

    ... Joe, W4TV


On 12/28/2015 3:03 PM, Bob Novas wrote:
> I've managed to hookup my K3S to my Windows 10 box and receive PSK31 using
> fldigi, but I'm not having success transmitting.  I put the K3S in VOX mode,
> USB, 14.070. I set the Mic+LIN to ON.  When I click the Tune button on
> fldigi, the K3S transmits, but with very low output.  I can't find any audio
> Volume control in Windows 10 to adjust the volume - the one control I think
> might be the correct control is at max output.  It's hard to identify what
> audio device is what.  Any hints?
>
>
>
> Also, the VOX is slow to go from Transmit to Receive when I stop
> transmitting.
>
>
>
> Are there any resources (e.g., documentation) specifically directed to
> fldigi + K3S?
>
>
>
> Thanks, Bob - W3DK.
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>