[Elecraft] P3 Config Question answered

[Ferris Jennings]

Thanks Don -
I made the change on all bands, and now the P3 displays the same on all
bands.
73
-Ferris NB6T-

-----Original Message-----
From: Don Wilhelm [mailto:w3fpr at embarqmail.com] 
Sent: Saturday, December 26, 2015 3:15 PM
To: Ferris Jennings; elecraft at mailman.qth.net
Subject: Re: [Elecraft] P3 Config Question

Ferris,

Many settings are per band - because what works fine on one band does not
work well for all bands.  There are other settings that are global.
I believe those settings you have cited are per band.  Set them for the
optimum on each band.

73,
Don W3FPR


On 12/26/2015 6:03 PM, Ferris Jennings wrote:
> Hi again -
>
>   
>
> I'm configuring my new P3, and have one big question: is there a way 
> to make "global changes".
>
>   
>
> To expand:
>
> .         I set up 20 meters to show S units (LvL Mode=S Units); a Ref Lvl
> from S0 to S9; Average = 5; Span = 20 khz, and apply that all to FN1
>
> .         I then set up 20 meters to show S units (LvL Mode=S Units); a
Ref
> Lvl from S0 to S9; Average = 5; Span = 100 khz, and apply that all to 
> FN2
>
>   
>
> That all works perfectly, and toggles between FN1 and FN2 is great.
>
>   
>
>