[Elecraft] k3 160 meter low output power

[jrmcbee at cox.net]

That is how I was testing it to start with into a dummy load.  

Thanks
John
---- Nr4c <nr4c at widomaker.com> wrote: 
> Try using a dummy load.  It could be that the radio just can't get a good enough match on 160 to deliver full power. 
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
> > On Dec 26, 2015, at 9:29 AM, John McBee <jrmcbee at cox.net> wrote:
> > 
> > Just wondering what might be wrong with a friend's K3.  It will only put out 85 watts on 160 meters.  All other bands put out 100 watts. I have done the calibration with the K3 Utility program, but no change.  Just curious to what might be wrong, or what I could check from him.  Thanks for the replies in advance.
> > Sorry if this was sent twice, chose the wrong reply address for this reflector.  Too many email accounts.
> > 
> > 73's
> > John
> > KM5PS
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to nr4c at widomaker.com