[Elecraft] K3: External Macro Launcher (Revisited)
David Cole
dave at nk7z.net
Fri Dec 25 14:36:27 EST 2015
Hi Joe,
As always you seem to have penetrated to the heart of my question...
THANK YOU!
As I have neither seen nor owned one of these keypads yet, I assume one
must program each key to emulate a key on a keyboard, separately
first.
So to check my understanding here is a brief overview:
I program the Genovation, using a PC to have a few buttons emulate a few
ASCII keys, and unplug it, and set it aside.
I then use a normal ASCII keyboard, jacked into the USB port of the P3
to program a few macros, using teh same keys as triggers I programmed
into the Genovation.
I then remove the ASCII keyboard, and replace it with the Genovation
keypad, now if I press one of the pre-programmed keys, (and that key
matches a key I have pre-programmed into the P3), the macro associated
with that key will trigger, thus controlling the K3, or P3.
Is that even close to correct? If so I order a Genovation today!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Fri, 2015-12-25 at 14:13 -0500, Joe Subich, W4TV wrote:
> On 12/25/2015 1:26 PM, Jim McDonald wrote:
> > Note that Fred said a P3 with the SVGA option.
>
> In which the Gennoation USB/HID version should work in lieu of a
> keyboard as long as you know the keystroke equivalents to program it.
>
> 73,
>
> ... Joe, W4TV
>
>
>
> >
> > 73, Jim N7US
> >
> >
> > -----Original Message-----
> >
> >
> > Hi David,
> > I don't know about a keypad but certainly a keyboard works FB.
> > Happy Hols,
> > 73,
> > Fred
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net
More information about the Elecraft
mailing list