[Elecraft] RFI in audio chain

[Gene Gabry]

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jim
Brown
Sent: Tuesday, December 22, 2015 10:33 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] RFI in audio chain
>Yes. I will again strongly urge Jan to STUDY my tutorial on Power,
Grounding, and Bonding for ham radio. 
> http://k9yc.com/GroundingAndAudio.pdf  If equipment in the shack was
properly bonded, removing that audio cable would not have solved the problem
(and >there would have been no problem).

73, Jim K9YC

Good study material for all to absorb! I would only add one additional
to-do. Check all your bonds, especially outside ground bonds, annually. Even
though you did a good job of bonding connections, oxygen oxidizes, in time.
Speaking from experience :) 

73 Gene, N9TF
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to n9tf at comcast.net