[Elecraft] KIO3B pricing

[w5sum at comcast.net]

Been reading all this with interest.  I got my K3, fully loaded, about 2 
weeks before the K3S announcement. Luckily I got the new Synth board in 
mine, but
I still sort of felt like a new car buyer, buying a new 2015 model a week 
before the 2016s hit the showroom floor.

Ronnie W5SUM
-----Original Message----- 
From: Oliver Dröse
Sent: Saturday, December 19, 2015 4:25 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] KIO3B pricing

Eric,

interestingly I didn't get your mail yet, neither the direct one nor
that via the reflector although Chas already responded to it. Who knows
... so will pick his one to answer. Thanks for the explaination. The
insight is much appreciated although not what I wanted to hear. ;-) Will
make up my mind again during Christmas ... maybe Santa will be generous.
;-) Otherwise as said before I can live with the "old" one plus external
USB card ... as I do with the old synth boards ...

73, Olli

Contest, DX & radio projects: http://www.dh8bqa.de


Am 19.12.2015 um 22:58 schrieb Charlie T, K3ICH:
> You make a very good case for buying a new K3s.
> I chose that route, and after all the finagling and swapping, it cost me 
> under $500 to go from a 2007 K3 to a brandie new 2015 K3s.
> Heckuva deal if you axe me.
>
> I must add that the recovered audio is absolutely THE best I've heard from 
> any transceiver.
> Even with a pair of mediocre speakers, it sounds great.
>
> Chas
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Eric 
> Swartz - WA6HHQ, Elecraft
> Sent: Saturday, December 19, 2015 3:50 PM
> To: Oliver Dröse <droese at necg.de>
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KIO3B pricing (was: Re: K3IOB)
>
> Hi Olli,
>
> Yes, 389.95 is the correct price.
>
> This is not a single board. It is a three board set that costs much more 
> than our old KIO3B to manufacture.  The board set also now contains a new 
> USB Codec, USB Comm port, Internal USB hub and additional logic to handle 
> routing of data between the USB and RS-232 paths (all fitting into the 
> same space as the old boards). The upgrade kit also includes two external 
> cables (one custom), new hw etc.  These boards are also manufactured at a 
> much lower volume than those in the PC market, with the subsequent 
> increased cost on our end. A $200 price would be selling at a significant 
> loss.
>
> Our goal is always to price our products as reasonably as possible after 
> taking into account our production and support costs while making enough 
> profit to continue to exist and serve the amateur radio market. We walk 
> that line carefully every day. And its always a challenge! :-)
>
> 73,
>
> Eric
> elecraft.com
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w5sum at comcast.net