[Elecraft] VOX / PTT combination on k3

Dave Hachadorian k6ll.dave at gmail.com
Sat Dec 19 12:02:13 EST 2015


The WinKey http://k1el.tripod.com/ , in conjunction with N1MM 
Logger+, does this beautifully.  It has separate delay 
adjustments for paddle-generated and computer-generated CW.  You 
can set the computer delay to zero and the paddle delay to a hang 
time of 1 to 2 letter spaces, so the paddle delay works at any 
speed.

Dave Hachadorian, K6LL
Yuma, AZ


-----Original Message----- 
From: Robert Bajuk
Sent: Saturday, December 19, 2015 5:28 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] VOX / PTT combination on k3

Hi,

Simple question... Is there a way to avoid VOX delay on CW mode 
when PTT is
used?

To be more concrete:

- CW and PTT signal are sent to K3 with N1MM directly from serial 
port (no
external keyer)
- external electronic keyer is connected to K3
- VOX is enabled

If I want CW keyer to work without PTT / paddle then VOX has to 
be enabled,
but VOX brings unwanted delay at the end when CW is sent from PC.

73 Robert, S57AW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: 
http://www.qsl.net/donate.html
Message delivered to k6ll.dave at gmail.com 



More information about the Elecraft mailing list