[Elecraft] K3S 15KHz output?

[Per-Tore Aasestrand]

Yes, I've tested it a long time ago.
It worked OK. Think I used SDR#.

Per-Tore / LA7NO



On 18 December 2015 at 03:25, Jeff Schmidt <jeff at kc9wsj.us> wrote:

> Not to hijack this thread, but has anyone used the IF out of a K3(s) w/ a
> Funcube Dongle Pro+?
>
> Jeff KC9WSJ
>
> On 12/17/2015 3:16 PM, Don Wilhelm wrote:
>
>> Bob,
>>
>> No 15 kHz output, but better for SDR experimenting, use the IF output at
>> 8.215 MHz.  That gives you a output that is prior to any IF filters in the
>> K3S.
>> If you want baseband I/Q outputs, you can connect a softrock receiver or
>> LPpan2 to that IF output.
>>
>> 73,
>> Don W3FPR
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ptaa at ieee.org
>