[Elecraft] K3S 15KHz output?

[Don Wilhelm]

Bob,

No 15 kHz output, but better for SDR experimenting, use the IF output at 
8.215 MHz.  That gives you a output that is prior to any IF filters in 
the K3S.
If you want baseband I/Q outputs, you can connect a softrock receiver or 
LPpan2 to that IF output.

73,
Don W3FPR

On 12/17/2015 3:57 PM, Bob Novas wrote:
> Far as I can tell, there is no 15KHz output from the K3S that can be used
> for experimenting with SDR. Is that correct? Thanks, Bob W3DK
>
>