[Elecraft] SDR Processing from KX3 in Python

[a45wg]

Terry,

I have been following the Tiny Pan article - but there seems to be little actual code - more of a set of good Modules/Libraries to use.

I can use Linux/Max as far as OS goes…. I am a Software Engineer by trade - but SDR is not my bread and butter.

Tim


> On 17 Dec 2015, at 21:17, <wb4jfi at knology.net> <wb4jfi at knology.net> wrote:
> 
> Check out the Tiny Python Panadaptor (April 2014 QST).  There is also a Tiny Python Panadaptor Yahoo group.  It runs a panadaptor (and waterfall) in Python on either a Raspberry Pi or Beaglebone Black with a KX3.  It does I/Q processing from whatever small sound card in Linux.  It can also do rig control if you can figure out how to do that on the BBB.  Pi is easier.
> 
> I'm not sure why the Elecraft would be any different than any other sound-card based I/Q processing - such as a Softrock.  I do realize that the rtl-sdr is quite different as far as inputting samples, however.  What platform are you using?  Windows, Linux, Apple?
> 73, Terry, N4TLF
> 
> 
> -----Original Message----- From: a45wg
> Sent: Thursday, December 17, 2015 11:12 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] SDR Processing from KX3 in Python
> 
> Hi,
>   Is anyone doing any SDR I/Q processing using Python with the KX3 ?
> 
>   I am trying to get some traction with this - but finding little info in terms of Elecraft - plenty in the rtl-sdr however
> 
>   Thanks for the valuable info contained here
> 
>     Tim - A45WG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wb4jfi at knology.net