[Elecraft] K3 Macros

[Wayne Burdick]

Larry,

Menu support for the UP and DN commands was unintentionally removed a long time ago. It was added back in as of rev. 5.33.

I tested your macros, and they work with the latest release (5.38), except that you need two "UP;" commands to go from FP mic to LINE IN.

73,
Wayne
N6KR



On Dec 16, 2015, at 5:55 PM, Larry Boekeloo <lboekeloo at sbcglobal.net> wrote:

> Hi everyone,
> I have two Macros set up to change the audio input on my K3 from the front panel to the Line In on the rear panel.
> They worked fine until one of the latest big releases:
> Macro 1: MNO53;DN;DN;DN;MN255:
> Macro 2: MNO53;DN;DN;DN;UP;MN255:
> Macro 1 sets the K3 to the mic connector on the front and Macro 2 sets the input to Line In on the rear panel.
> When I execute them, they come up to the display and I have to rotate the dial to select the input.  Previously, they just worked.
> Any ideas?
> Thanks.
> Larry, KN8N
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com