[Elecraft] K3s USB audio

[Ed Muns]

The Codec deals with digitized audio of LINE IN and LINE OUT, independent of
mode.  It works fine for me in RTTY and I don't see why it wouldn't work for
SSB and other modes.

A couple times, I did see spikes at 60 Hz intervals in the RTTY audio
spectrum.  Since most of the time that was not the case, I assumed it was
intermittently coming from somewhere else.  

Ed W0YK

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Barry
N1EU
Sent: 14 December, 2015 02:28
To: elecraft
Cc: wayne at elecraft.com
Subject: [Elecraft] K3s USB audio

The K3s manual p18 makes no indication that USB digitzed audio is not
supported in SSB.  Can anyone confirm that USB audio is actually NOT
supported in SSB?

On another note, I'm seeing a huge amount of 60hz hum being passed on
the USB codec playback device, rendering it unusable for rig
recording.  Has anybody else tried this?

Thanks & 73,
Barry N1EU

On Mon, Dec 14, 2015 at 12:44 AM, Chris <chris.yln at blueyonder.co.uk> wrote:
> Have you set your mode to digi my k3 only tx audio when I use it in digi
mode not lsb or usb or cw
>
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1eu.barry at gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ed at w0yk.com