[Elecraft] KRX3 & K144XV question

[Oliver Dröse]

Alan,

as your quoted instructions say: VFO A on 2 m, VFO B on HF-6. Does not 
work vice versa (as in your request) as the K144XV only connects to the 
main RX (plus the sub RX if you share both, that would mean VFO A + B 
both on 2 m). Also take a look at the RX switching PDF on the Elecraft 
website for deeper insight into possible RX path'.

73, Olli - DH8BQA

Contest, DX & radio projects: http://www.dh8bqa.de


Am 07.12.2015 um 21:58 schrieb Alan Muldawer:
> I have a K3 with the second receiver KRX3 and I also have the internal 2
> meter card K144XV and what I would like to do is to be on 6 meter, VFO A
> and to listen to 2 meters on VFO B . I have had no luck! It looks like in
> the information for K144XV it seems that this is possible :  "If you have a
> KRX3 sub receiver installed, you can tune HF-6 meters with the sub while
> operating on 2 meters with the main receiver/transmitter. "
> http://www.elecraft.com/manual/K144XV%20Data%20Sheet%20rev%204sm.pdf
> I have separate antennas for both bands. The 6 meter antenna is on #2 and
> the 2 meter antenna is on #3.
> Has anyone been able to do this and how. Thanks!
> 73 Alan N3ALN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de
>