[Elecraft] K3S rocking on flat surface - SOLVED!

[Bob Novas]

Thank you to everyone that responded.  I took the bottom cover off and
immediately saw the problem - It was an assembly mistake. I had installed a
standoff that was 1/32 too long on the screw holding the PA shield -- the
screw at the top of the rear bottom panel that's above the right foot,
looking at page 70 of the assembly manual.  I replaced it with the correct
length standoff, and the problem is fixed.  Don't know how I missed that on
assembly!  Shouldn't work tired,  I guess.  Bob - W3DK