[Elecraft] N1MM CW issue

[Chester Alderman]

What you both neglect to mention is how you are keying with NL+? It makes a
difference.
For keying my K3, I use the DTR line. I have tested sending CW, with the
default weight setting, up to about 115 wpm and from 20 wpm up to the max of
my K3, in my opinion, the NL+ weight maintains perfect weight/spacing up to
that speed.

So what do you use for keying NL+ and what rig are you using?

73,
Tom - W4BQF


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Brian
Hunt
Sent: Friday, December 4, 2015 10:34 AM
To: Fausto Coletti
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] N1MM CW issue

I think the dits that N1MM makes are too short, at least to my ear. I set
the CW weighting in N1MM 10-20% heavier and that seems to help. I never get
much above 32 won but it seems fine there. The CW weight setting in the K3
menu only affects paddle input. 

73,
Brian, K0DTJ

> When I select a speed higher than 28-30wpm, the weighing between 
> points and lines changes and, at 40wpm the transmitted message becomes
incomprehensible.
> 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to aldermant at windstream.net