[Elecraft] SP3 ISSUE

[Guy Olinger K2AV]

You should only be using a cable with a stereo plug on BOTH ends.

And be VERY sure, absolutely positive that the plugs actually ARE fully
inserted. Many have been led astray by those two.

This is a really common happening. I've done it to myself many times.

73, and good luck

Guy K2AV

On Thu, Dec 3, 2015 at 2:18 PM, Robert 'RC' Conley <rc.kc5wa at gmail.com>
wrote:

> My SP3 arrived today. it is very beautiful and compliments my K3/P3.
> However it does not seem to perform properly. If the supplied cable  or
> any  stereo cable is fully plugged into the K3 rear speaker jacks and SP3
> inputs no audio comes out. However if the cable is loosely plugged in I
> have audio. I checked this on the Menu settings of SPKRS and SPKR+PH both.
> Am I missing something?
>
> 73
>  RC KC5WA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av.guy at gmail.com
>