[Elecraft] K3/N1MM, freq jumps etc in CQ WW CW

[Oliver Dröse]

Ignacy,

no problems like this in my setup overhere, all works flawlessly so I'd 
assume it is something in your configuration. If A->B fixes it might it 
be you have a SubRX that is (accidentally) turned on?

Please leave the button functions alone, I often switch on RIT during 
transmit when running to be able to zero in on off-frequency callers. 
Never a problem or any lockups.

73, Olli

Contest, DX & radio projects: http://www.dh8bqa.de


Am 01.12.2015 um 22:39 schrieb Ignacy:
> Generally K3 worked very well. But I would like to report some problems.
> This is with N1MM+
>
> I interrupt a transmission with ESC. Periodically, I seem to hear completely
> different stations with CQ called on my run frequency. Before I was getting
> mad but now I know that K3 receives a different frequency than shown on the
> display. Pressing A=>B button fixes the situation.
>
> When running, accidentally pressing RIT or XIT causes K3 to get stuck in
> transmit. Switching off/on is the only solution. I am wondering whether most
> of the buttons can be make inactive in TX.
>
> Ignacy, NO9E
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-N1MM-freq-jumps-etc-in-CQ-WW-CW-tp7611005.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de
>