[Elecraft] CW RX

[Joe Subich, W4TV]

I use similar settings - except I follow the advice of Wayne and Lyle
against using any boost in the EQ.  That leaves the bottom two and
top two bands at -16 with the middle four flat.  On occasion, I have
also set the 1600 Hz band to -16 dB but I set Pitch at 490 Hz which
places 1000 - 12000 Hz well down on the filter skirts even if I have
widened the DSP to 800 Hz.

73,

    ... Joe, W4TV


On 8/27/2015 12:15 PM, Chortek Bob via Elecraft wrote:
> Hi Mark,
>
> Yes, I have been using the settings recommended by Fred Cady - KE7X and think they are great:
> Set 50 Hz at -16db
> Set 100 Hz at -16db
>
> Set 200 Hz at 0db
>
> Set 400 Hz at +6db
>
> Set 800 Hz at +6db
>
> Set 1600 Hz at 0db
> Set 2400 Hz at -16db
> Set 3200 Hz at -16db
> 73,
> Bob AA6VB
>
> pastormg wrote
>> Good Evening,
>> I have been tinkering around with the RX EQ #'s for CW. Would anyone have
>> any good settings to recommend?
>> Mark Griffin, KB3Z
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/CW-RX-tp7606756p7606759.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bobchortek at yahoo.com
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>