[Elecraft] K3 Aux RF mod for Rx out (No Sub-Rx)

Russ mundschenk55 at msn.com
Tue Aug 25 22:18:45 EDT 2015


Thanks Sverre...
Since I have a Mini-Circuits splitter - I'll give it a try to prevent a double termination and 2-1 VSWR
Russ KD4JO

> Date: Tue, 25 Aug 2015 12:52:41 -0700
> From: LA3ZA at nrrl.no
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 Aux RF mod for Rx out (No Sub-Rx)
> 
> I'm using a feed off the KXV3A's Rx in and Rx out ports, as you say, to feed
> a shortwave receiver. It's very simple with no splitter, just a BNC Tee
> connector. 
> 
> The K3 needs to be switched to a band which is higher than the external
> receiver for it to work as RF is routed through the K3's output filters.
> Also the K3 needs to enable the Rx ant. The shortwave receiver should be
> protected from the K3's transmitter with this scheme, at least my receiver
> has not suffered any damage.
> 
> 
> Don Wilhelm-4 wrote
> > If you want to share the antenna, then the splitter is a solution - what 
> > about protection for your SDR receiver when the K3 is transmitting?
> > 
> > On 8/24/2015 2:18 PM, Russ wrote:
> >> I would like to split my K3's Rx feed to also feed my new SDRPlay SDR.
> >> One way is to put a splitter (I'd use a mini-circuits ZFSC-2-1W+ or
> >> similar) between the KXV3A's Rx In and Rx out ports and suffer the 3 dB
> >> loss (which should be insignificant since my ambient noise is far above
> >> the K3's Rx noise floor.
> 
> 
> 
> 
> 
> -----
> Sverre, LA3ZA
> 
> K2 #2198, K3 #3391,
> LA3ZA Blog: http://la3za.blogspot.com,
> LA3ZA Unofficial Guide to K2 modifications: http://la3za.blogspot.com/p/la3za-unofficial-guide-to-elecraft-k2.html
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-Aux-RF-mod-for-Rx-out-No-Sub-Rx-tp7606708p7606736.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mundschenk55 at msn.com
 		 	   		  


More information about the Elecraft mailing list