[Elecraft] Multiple KUSB Connects

[Dick Dievendorff]

I use either an Edgeport 8-port USB to serial adapter, or a Gearmo 4-port USB to serial adapter, or a KUSB or KXUSB depending on what I'm testing.
No USB hubs here, tho.

73 de Dick, K6KR



> On Aug 24, 2015, at 18:57, David Ahrendts <davidahrendts at me.com> wrote:
> 
> In a multiple Elecraft device station, I’m curious if anyone connects all KUSBs to a USB hub semi-permanently so that when you need a connection you already have that hardware access? Realizing you cannot run two Utility programs simultaneously (at least I haven’t had success with that), what is your setup? I have attempted with a USB hub into a Mac Mini with marginal success. Please opine.
> 
> David A., KC0XT
> 
> 
> 
> David Ahrendts   davidahrendts at me.com   
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com