[Elecraft] P3 or Sub Rx?

Wes (N7WS) wes at triconet.org
Sun Aug 23 14:29:49 EDT 2015


Regrettably, the JAs are "catching up" to the EUs, but generally true.

As to the original question, I use neither, but do have the near equivalent of 
the P3. an SDR-IQ used as a panadapter.  Although this could be used as a second 
RX, I have enough difficulty listening to one RX, I don't need to be further 
confused with a second.

A couple of more QSLs for 30-meter QSOs and I will have 8-band DXCC. I have DXCC 
Mixed, CW, Phone and RTTY and I'm 3 away from top of the Honor Roll with my 
modest station (http://qrz.com/db/N7WS)  Nevertheless,I still don't know which 
of categories below I fit into other than it's not B.

Wes  N7WS

On 8/23/2015 5:37 AM, Vic Rosenthal wrote:
> If you are dealing with JA pileups, you only need a P3 because only the station that has been called by the DX will answer.
> With EU pileups you will also need a subrx because everyone will be calling all the time.
> USA pileups are in between.
>
> Vic 4X6GP/K2VCO
>
>> On Aug 23, 2015, at 1:43 PM, Mike K2MK <k2mk at comcast.net> wrote:
>>
>> Hi Jerry,
>>
>> There's
>> A. casual DXing
>> B. contesting
>> C. casual split pile-up chasing
>> D. die-hard split pile-up chasing
>>
>> For A you don't need either
>> For B you should consider the P3
>> For C you should consider the Sub RX
>> For D you should order both immediately
>>
>> If you get the P3 you will use it every time you turn on your radio. In
>> fact, you will feel naked without it. If you get the Sub RX you will have it
>> turned off most of the time.
>>
>> 73,
>> Mike K2MK
>>



More information about the Elecraft mailing list