[Elecraft] K3 Woes Continue!!!

[Mark AB7MP]

(I don't think I sent this from the right account the 1st time - forgive the 
duplicate if it happens.)

If Elecraft is consistent from K3 to K3S, you might check the book for 
Parameter Initialization (reset to default).
Page 72 in K3S manual.

Your mileage may vary...

73

Mark, ab7mp

-----Original Message----- 
From: pastormg2 at verizon.net
Sent: Friday, August 21, 2015 4:01 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 Woes Continue!!!

Good Evening,
This is Mark Griffin, KB3Z. I am having a problem with updating the K3 
Firmware. I have a black screen with MCU LD on it. The TX light is flashing 
red. My usb to serial port cable is a prolific cable. My computer does not 
have any issues with this cable. But for some reason the K3 Utility is 
having a problem where it says attempting to contact K3 and it goes through 
the various speed settings. I have disconnected the power from my K3 and 
followed the Forcing a Firmware Download to the letter T but if my computer 
can't communicate with the K3, all is lost. Right now I have the cable 
attached to my P3 and the P3 cable is attached to the K3. I have called 
Elecraft, and waiting for Dave to call me back. Hopefully he will call me. I 
do not understand why the PC will not communicate with my K3. Why Elecraft 
doesn't have a button to push to just reset the radio is beyond me. If I 
sound frustrated, I am! Mark Griffin, KB3Z
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ab7mp at arrl.net