[Elecraft] K3S Macro Programming - Rotating Macros

[Byron Peebles]

This is an RTFM problem.

I was confusing the KX3 Table with the K3 Table.

When I used the proper values from the K3 Table, it worked perfectly.

73, Byron

MACRO1-4: #11, 12, 13, 24
PF1-PF2: #45, 47

On 08/13/2015 08:14 PM, Byron Peebles wrote:
> I am trying to program my first "Rotating Macro", where the PF1 Button 
> will set SPLIT+1 the first time it is pressed and held and it will 
> UNSET SPLIT the second time it is pressed and held.
>
> I am basing this on the work by W8TN and LA3ZA, and others who have 
> offered support here.
>
> I have had PF1 as SPLIT+1 and PF2 as SPLIT+5.  They are saved in 
> MACRO1 and MACRO2, respectively.
>
> I am trying to add MACRO3 and MACRO4 to CLEAR SPLIT and set to SPLIT+1 
> and SPLIT+5 again.
>
> I added the following to MACRO1 based on the Programmers reference:
>
> MN110;SWT20;SWH18;SWT14;
>
> #20 is listed as MACRO3, #18 is listed as PF1.
>
> But, the SPLIT part of the MACRO works, but the MACRO is not 
> reprogrammed.  So, little joy.
>
> When I execute the MACROs from K3 Utility, the reprogram things fine.  
> But not when I hold the button.