[Elecraft] P3 TX Mon question

[W4CCS]

Joe:

You are correct Sir.. Lower to power output from the K3#1 to below 15 watts,
and I see no reaction on K3#2 P3 TX Mon..

Don't know of a way to fix this..!! It is very annoying..

W4CCS

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe
Subich, W4TV
Sent: Wednesday, August 12, 2015 9:30 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] P3 TX Mon question


As N1AL indicated, the TX MON goes to maximum gain at low signal levels.
You're probably seeing inter station coupling - hopefully at low levels.

Is the SWR very high - all "reflected"?

73,

    ... Joe, W4TV


On 8/12/2015 9:20 AM, W4CCS wrote:
> I have two K3's and two P3's but only one has the TX Mon option.. When 
> I transmit with the K3 that does NOT have the TX Mon installed, the P3 
> that does have it reacts showing VSWR and one sweep of the transmit
envelope..
> This seems very strange.. The only thing in common between the two is 
> the MicroHam router program..  Suggestions..??
>
>
>
> Clyde Scott - W4CCS
>
> Moultrie, GA - EM81cg
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> lists at subich.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to w4ccs at w4ccs.com