[Elecraft] RTTY on the K3S

[Joe Subich, W4TV]

If you get a pure carrier you either have the data sub-mode
(AFX hold) set to FSK_D or your data program is not operating
correctly (generating a single tone).

73,

    ... Joe, W4TV


On 8/11/2015 11:06 PM, Rich Seifert wrote:
>
> On Aug 11, 2015, at 6:17 PM, Joe Subich, W4TV <lists at subich.com> wrote:
>
>>
>> On 8/11/2015 8:56 PM, KE1B wrote:
>>>
>>> Is there any way for the K3S to take its audio from the USB codec
>>> rather than the Line-in or Mic-in?
>>
>> Exactly the same configuration as AFSK with audio via Line In but
>> no connection to the Line In jack.
>>
>> Mode         = DATA
>> SubMode      = AFSK A
>> MENU:Mic Sel = Line In
>> Mic gain set for four bars of ALC with fifth bar flickering
>>
>
> I have that configuration, but when I transmit, I only get a pure carrier, no data diddling.
>
> Rich KE1B
>
>
>