[Elecraft] K3 with internal 144XV 2 meter transverter
Harald Fritzsche
dd0vs at gmx.de
Wed Aug 12 08:40:07 EDT 2015
GM,
I had the same question a month before (in another forum).
Output depends on gain adjustment with R87, see k3 schematic. Which seems to be set to full gain from factory side.
If so, the 1mW overdrives the transverter, so you should see full 10W on ant 3 only.
I used the Elecraft Dummy load for measurement and adjustment.
HW?
Vy73
Harald DD0VS
.-.-. --... ...-- -.. -.. ----- ...- ...
> Am 12.08.2015 um 11:37 schrieb Bruce Osterberg <n9bx73 at gmail.com>:
>
> If the internal transverter is adjusted for 1.0MW output max, what power should I see out of the rig at antenna connection 3? RF power on Meter shows full scale but that is in Milliwatts not watts. Also display just says ANT, not ANT 3 or should it. Thank you.
>
> Bruce N9BX 73
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dd0vs at gmx.de
More information about the Elecraft
mailing list