[Elecraft] RTTY on the K3S

[Joe Subich, W4TV]

On 8/11/2015 8:56 PM, KE1B wrote:
 >
 > Is there any way for the K3S to take its audio from the USB codec
 > rather than the Line-in or Mic-in?

Exactly the same configuration as AFSK with audio via Line In but
no connection to the Line In jack.

Mode         = DATA
SubMode      = AFSK A
MENU:Mic Sel = Line In
Mic gain set for four bars of ALC with fifth bar flickering

The same settings work for other digital modes with DATA A
substituted for AFSK A.

73,

    ... Joe, W4TV


On 8/11/2015 8:56 PM, KE1B wrote:
>
> Is there any way for the K3S to take its audio from the USB codec
> rather than the Line-in or Mic-in? I don’t see that choice in the
> menu.
>
> Conversely, is there any way for N1MM+/MMTTY to send ASCII data to
> the K3S for FSK transmission. I don’t think they are set up to do
> that. What I am trying to get is a one-cable (USB) solution for all
> modes. (CW works fine with RTS/DTR over USB.)
>
> Rich KE1B