[Elecraft] P3TXMON Bug?

[Alan]

It will do that if the K3 is in transmit mode but with no power coming 
out.  The P3 auto-scales the modulation display amplitude, so if there 
is no signal it jacks the gain way up and you see quantized noise.

The next version of P3 firmware will limit the maximum gain so you don't 
see so much noise in that situation.

Alan N1AL


On 08/11/2015 04:00 PM, Ron Durie wrote:
> My P3TXMON scope display is not performing as it should, while I am talking
> in SSB mode.
>
> Frequently the display will go to a straight line with vertical signals that
> are very narrow.
> It looks almost like it is switching to a very wide span or the time base is
> changing frequency.
> This will continue until I stop transmitting, then it will be ok for a
> while, then does it again.
>
> A friend is also experiencing this same bug on his P3TXMON.
>
> Anyone experiencing this same thing?
>
> Ron Durie
> WB4OOA Elecraft K-Line
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1al at sonic.net
>