[Elecraft] K3S Line out

[Mark]

Just finished the build and haven't configured for the USB codec yet - 
starting with the familiar methods 1st then transitioning to the more 
advanced in an attempt to get on the air with the new rig as quickly as 
possible.  Had plans on going USB and comparing that to analog - just wanted 
to see both bar graphs jumping!

Probably will start working on the USB option tonight or tomorrow.

Tnx

Mark, ab7mp

-----Original Message----- 
From: Nr4c
Sent: Saturday, August 08, 2015 3:40 PM
To: Mark
Subject: Re: [Elecraft] K3S Line out

Do you have the KRX3 Sub receiver installed?

There isn't much on the other channel unless you do.

And why would you use this instead of the USB audio CODEC?

Sent from my iPhone
...nr4c. bill


> On Aug 8, 2015, at 6:26 PM, Mark <ab7mp at arrl.net> wrote:
>
> Stumped for now - I'm not getting stereo out of the line out jack.  Using 
> know good cables, only one channel has audio.  Anything special in the trs 
> wiring for this?
>
> Mark, ab7mp
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com