[Elecraft] K2 + KPA100 + KAT100

[Don Wilhelm]

Kev,

You will need the EC2 as well as the KAT100PNL kits.  The KAT100PNL kit 
has only the front and rear panels as well as the headers required for 
the KAT100 board.
You may also want the tilt stand if you want to tilt it the same as the K2.

73,
Don W3FPR

On 8/8/2015 2:31 AM, Kevin Schache wrote:
> Hi to all,
>
> My K2 includes the KSB2 SSB, KDSP2, and the K102. The external 
> KAT100-1 ATU has also been completed.
> I've just received kits for the KNB2 and the KPA100 and I'm planning 
> to complete them in that order.
>
> After a lot of research in the archives of this list, I've now 
> belatedly decided I want to keep the K2 for QRP portable and keep the 
> KAT100 and the KPA100 separate in an external EC2 enclosure.
> I see that I can order the KAT100PNL to convert the KAT100-1 to a 
> KAT100-2 but I'm uncertain what panels are included in that kit.
> This is probably a stupid question but, Is that all that's required to 
> convert the KAT100-1 enclosure to an EC2 with space for the KPA100 ?
> I'm cross with myself for not thinking this out before I placed the 
> last order.
> Is there anything else I will need ?
> Or do I have to buy a complete EC2 ?
>