[Elecraft] Keyboard Issue - I wonder how many folks have had buyers

[Jerry Moore]

Excellent!! :)

-----Original Message-----
From: Marc Veeneman [mailto:mhvnmn at gmail.com] 
Sent: Friday, August 07, 2015 9:33 PM
To: Paul Saffren
Cc: Jerry Moore; elecraft Reflector
Subject: Re: Keyboard Issue - [Elecraft] I wonder how many folks have had
buyers

Hah!  That did it, Paul.  Now I'm not suffering character loss, even the
double "l" in hello gets sent every time I've tried it.  The quick brown fox
is happy, too.

Oddly, in the several times I've typed the typical quick brown fox, I
haven't seen the data delay either.

What a difference!

It seems that you have revealed a way to avoid the data loss problem.  Thank
you very much. For the first time I feel confident enough to use the
K3/P3/SVGA keyboard in live CW QSOs.
- 
Marc   W8SDG

> On Aug 7, 2015, at 6:15 PM, Paul Saffren <pauls at elecraft.com> wrote:
> 
> Marc,
> 
> Plug your video monitor into the P3 and change the resolution setting
(SVGA res) to 1024x768 .  My guess that will help.   At 1920x1024 the SVGA
runs a little slower (more pixels to compute). Since you are not using the
monitor, there is no reason to have it at the highest resolution.
> 
> -Paul
> 
> Paul Saffren - N6HZ
> Project Manager
> Elecraft Inc.
> 831-763-4211 x122
> www.elecraft.com
> 
> On 8/7/2015 2:09 PM, Marc Veeneman wrote:
>>> On Aug 7, 2015, at 3:18 PM, Paul Saffren <pauls at elecraft.com> wrote:
>>> 
>>> Hi Marc,
>>> 
>>> I was reading Jer's recent post, "Executive Summary",   If you have that
monitor connected to the P3/SVGA, press Ctrl-Alt-S on the keyboard and tell
me what the TRANSMIT MODE is set to.
>> VOX
>> 
>> 
>>> Also list what the Transmit Timeout is.
>> 3000
>> 
>> 
>>> Next, on the P3, enter the SVGA menu, scroll to SVGA res, and tell me
what the resolution is set to for the SVGA monitor.
>> 1920 x 1080
>> 
>>> Finally, in Jer's post it says you are sending at 60 WPM CW, but the K3
only goes to 50 WPM.   What is the K3 software version?
>> 05.29
>> 
>> -
>> Marc
>> 
>> 
>>> -Paul
>>> 
>>> Paul Saffren - N6HZ
>>> Project Manager
>>> Elecraft Inc.
>>> 831-763-4211 x122
>>> www.elecraft.com
>>> 
>>> On 8/6/2015 6:48 PM, Marc Veeneman wrote:
>>>> That's a relief.  C is good.
>>>> 
>>>> Now I feel more comfortable, Paul.  And I have some insight into your
life, too.  :-)
>>>> 
>