[Elecraft] KAT100 Dead

[Don Wilhelm]

Tom,

Check the voltages on Q8.  When the K2 is powered, you should have 12 
volts on the gate and the drain should go to a low voltage.
That in turn should make Q1 conduct.

73,
Don W3FPR

On 8/6/2015 11:41 PM, Tom Field wrote:
> Having gotten the side tone situation sorted out, I now find I have no
> power going to the KAT 100.
> I've checked the plug and voltage on D4, R12, and R11.  There appears to be
> nothing getting through Q1, I have no voltage on the collector and no
> voltage on U8.  Bad Q1?
>
>