[Elecraft] K3S band Change with DX4WIN

[Joe Subich, W4TV]

> When I click a spot, switch bands, even CW-to-CW, the K3S switches
> first to the band, then SSB, and then CW.

Does the K3 actually switch to SSB or does it switch to the last used
mode on the "new" band before actually switching to the requested mode?

The K3/K3S stores mode by band and will recall the last used mode each
time you switch bands.

73,

    ... Joe, W4TV


On 2015-08-05 9:18 AM, Bill Breeden wrote:
>
> Byron,
>
> I never noticed the behavior you described until you pointed it out, but
> I see now that my K3 works the same way.  I have been using the file
> "Elecraft K3 X5" with DX4WIN to drive my K3 for several years. I suspect
> the radio is doing exactly what DX4WIN is requesting.
>
> 73,
>
> Bill - NA5DX
>
>
> [Elecraft] K3S band Change with DX4WIN
>
> Byron Peebles NZ3O at arrl.net
> Tue Aug 4 21:42:32 EDT 2015
>
> I am researching an issue I experience when I click a spot in DX4WIN.
>
> When I click a spot, switch bands, even CW-to-CW, the K3S switches first
> to the band, then SSB, and then CW.
> The momentary switch to SSB is probably something in the radio file I am
> using, new to me, but I wanted to see if anyone else had this issue.  I
> am using the DX4WIN file "Elecraft K3 X5".
>
> TIA, 72, Byron
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>