[Elecraft] KSYN3A dead?

[Enrico Lorenzoni IU3AZC]

Hi Petr, I have two ksyn installed, and both worked fine for some months.
I did not open my K3 in the last weeks, and two days ago my K3 was ok, 
so this happened without touching anything.
An italian OM had another problem with a deprogrammed SYN. I wonder if 
Elecraft is aware of this and who's gonna pay the cost to reprogram it?

thanks for the reply
73 de Enrico IU3AZC


Il 04/08/2015 16:55, ok1rp ha scritto:
> Hi Enrico,
>
> The correct status for KSYN3A boards in TECH MD: ON is OK! So you should see
> SYN1 OK and SYN2 OK if you have both installed. The latest KSYN3A boards
> should work with 5.14 or later.
>
> Please open K3 and at first check if your cables are connected to right
> boards (not swapped by accident) and if all connectors are properly plugged
> in and have proper contacts please. It is common issue the TMP connectors
> has bad contact on the synths boards.
>
> Hope it helps,
>
> 73 - Petr, OK1RP
>
>
>
> -----
> http://ok1rp.blogspot.com
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KSYN3A-dead-tp7605860p7605868.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to iu3azc at gmail.com