[Elecraft] P3 - still in trouble with new firmware
Guy Olinger K2AV
k2av.guy at gmail.com
Mon Aug 3 21:04:47 EDT 2015
Rechecking stuff for Paul at Elecraft. I think the last P3 upgrade I did
was a "Send All New Firmware". When I checked just now I had 1.24 SVGA in
the firmware available list but the menu display said I was running 1.16
SVGA. I had loaded 1.50 for the P3. Now rerunning the load firmware, but
using a copy ALL firmware action. The FPGA stuff takes quite a while.
......
OK, that fixed it. Now have 1.24 showing in SVGA firmware menu item. Have
NB in upper right hand corner of screen.
I may have screwed up the firmware load, but shouldn't "Send All New
Firmware" have sent 1.24 over in the same session that loaded 1.50? I just
turned on the firmware install and then went and did something else. Wasn't
watching it.
I used the SVGA all through the NAQP contest and the SVGA performed
brilliantly. Hugely useful. But it is clear I was using firmware 1.16.
I guess my bad on the earlier firmware load.
73, Guy K2AV
On Mon, Aug 3, 2015 at 7:11 PM, Dan Maase AC6DM via Elecraft <
elecraft at mailman.qth.net> wrote:
> Guys:
>
> While I don't really see much benefit from NB, it does seem to work same on
> P3 and SVGA.
> NB text is upper right corner as expected.
> SVGA displays fill below peak level as configured -- no change in behavior
> here.
> My display resolution is 1024 x 768. Wonder if there is a memory mapping
> problem with higher resolutions?
>
> Dan
> AC6DM
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/P3-still-in-trouble-with-new-firmware-tp7605764p7605830.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av.guy at gmail.com
>
More information about the Elecraft
mailing list